Location: Ask the Storage Experts

Discussion: Upgrading Disks in MD3000i SANReported This is a featured thread

Category: Discussion Forum / General Discussion
Showing 2 posts

BrentJackson
Upgrading Disks in MD3000i SAN
Dec 14 2009, 8:45 AM EST | Post edited: Dec 14 2009, 8:45 AM EST
We have an existing MD3000i with 2 MD1000 chassis attached. The MD3000i has 15x 750 SAS drives (configured as a RAID 5 disk group) and the MD1000s have a total of 30 x1TB SATA drives (configured as a RAID 6 disk group).
Our Dell rep tells us that 2TB drives are now supported and we would like to upgrade the existing SAN to increase overall raw capacity to 95TB. What is unclear is how one accomplishes this without loosing existing data on the SAN.
Can someone tell me how to upgrade the existing array capacity? Do you find this valuable?    
johnnyheavens
johnnyheavens
1. RE: Upgrading Disks in MD3000i SAN
Dec 17 2009, 11:20 PM EST | Post edited: Dec 17 2009, 11:20 PM EST
Without somewhere to dump it to that's a great question. One drive at a time? If you start with the hot spares it should only take a couple months. :/ Do you find this valuable?    

Related Content

  (what's this?Related ContentThanks to keyword tags, links to related pages and threads are added to the bottom of your pages. Up to 15 links are shown, determined by matching tags and by how recently the content was updated; keeping the most current at the top. Share your feedback on Wetpaint Central.)
Dell PowerVault220 & PowerEdge2900 usb EqualLogic WAN Replication using f5 BIG-IP WAN Optimization Module
Reboot Dell 4610 POE Capabilities M6220 To 5424 to PS5500 Equallogic -Jumbo Frames
Disk configuration Data Protection and Storage availablity User conference presentations?
powervault tl2000 and Veritas 9.1 Powerconnect 6248 firmware recovery issue Dell Storage Forum - EqualLogic User Group